About Us

New Equipment
Division

Pre-Owned
Equipment
Division

AMAT P5000
AMAT Spare Parts
Diffusion
-Dispatch Conveyor
       Furnace Model
       14410-NS
Metrology
Ovens
Photolithography
Pumps
Solar
-ASM Epsilon 2000
       Epi Reactor
-Alcatel DRIE
-Dispatch Conveyor
       Furnace Model
       14410-NS
-Schmid Light
       Induced Plater (LIP)
-SELA Sample Prep
       for Failure Analysis
       for SEM and TEM
-EEJA (Electro Plating
       -Engineers of
        Japan) Ni and
        Ag Plating
        System
-Schmid Light
       Induced Plater (LIP)
-EVG101 Coater
-Thermco Maxibrute
       200mm Oxidation
       Furnace
-Spare Parts
-Vacuum
-Wet Process
-Additional
     Equipment

Contact Us

Home

   
 

ADDITIONAL EQUIPMENT

Conquer Industries strives to provide quality pre-owned equipment at reasonable prices. Below is a sampling from our current inventory. Of course, many other types of equipment are available, please call us to discuss these systems, or any other equipment needs you may have.

40' Long X 10' Wide Clean Room (NEW ITEM) CALL FOR PRICE
  40' long by 10' wide Clean Room tested at Class 100, Rated at Class 1000 currently available. Testing at Class 100 was achieved by sealing the walls to the floor. Comes with one air handler, light panels, and HEPA panels. Panels are approximately 2" thick, most are four feet wide, some are two feet wide and with a modular design you can create a room that suits your needs best. HEPA's are in the ceiling, as are the four foot lights. Included is the Unistrut support structure for the T-bar ceiling strips and the panel joining clamp rods. Currently palletized and in storage in the bay area

Flammable Liquids Storage Cabinet (NEW ITEM) CALL FOR PRICE
 
  • 36.5" x 24" x 39" H OD
  • Adjustable height inner shelf
  • All flame resistant interior and exterior
  • Labeled per NFPA Codes
  • Manufactured for compliance with NFPA Code #30
  • Self Closing Door:
  • Rotate piston clockwise, door closes slowly
  • Rotate piston counter clockwise, door closes faster
  • Door has hydraulic check
OXFORD PLASMALAB SYSTEM 90 (NEW ITEM) CALL FOR PRICE
  OXFORD Plasmalab System 90

Including:
Advanced Energy RFX600 Power Supply (600 watts at 13.56 MHz) RFPower Supply,
Advanced Energy TCM Matching Network,
MKS 652 Throttle ValveControl,
SC Technology End Point System,
Techware Systems Model TC-III PLC,
Balzers TCP-380 Turbo Pump Controller,
Balzers TCU-330S Turbo Pump,
load lockchamber,
single gas inlet,
11" table.
Excellent condition.

Perforated Stainless Steel Parts Stand(NEW ITEM) CALL FOR PRICE
  All Stainless Steel Construction
Dual Shelves
18"W x 12"D Perforated top shelf
18"X x 9.5"d Perforated second shelf
Solid stainless steel back and sides
approximately 3" height
Stainless steel legs and frame
Overall height = 37"
Computer based system
Leg levelers
Outstanding condition
AMAT/Kyocera Plasma Proof Dome(NEW ITEM) CALL FOR PRICE
  Material: Al2O3, Y2O3, Si3N4
For 200mm/300mm equipment
High Purity
High plasma durability
New in Original Box
Certificate of Conformance Included
Three each available
Tegal 903/e CALL FOR PRICE
  Tegal 903/e is an in-line single wafer plasma etcher which the capability to etch vias and contacts with anisotropic or sloped profiles. It is for etching silicon dioxide, silicon nitrides, and polyimides and is designed to accommodate 3" to 6" wafers.

Tegal 903E Plasma Etch System Features and Specifications are as follows:
  • Cassette to cassette single wafer plasma etcher system
  • Microprocessor control system
  • SEMI SECS II Protocol
  • Data link: RS232C serial port
  • Stores up to 20 recipes (Standard)
  • Pick-and-place transport type
  • Gas input: Mass flow controllers (4)
  • Filtration: 0.01 micron
  • Heated capacitance nanometer (MKS - 127A)
  • Range: 0 - 10 Torr
  • Temperature Range: 20 - 35°C
  • Endpoint detection: Dual channel optical emission with optical filters
  • Closed-loop nitrogen ballast
  • Anodized aluminum chamber
  • Gas flow: Showerhead
AERO VAC SVR5-80TV1 (NEW ITEM) CALL FOR PRICE
  AERO VAC SVR5-80TV1