About Us

New Equipment
Division

Pre-Owned
Equipment
Division

AMAT P5000
AMAT Spare Parts
Diffusion
-Dispatch Conveyor
       Furnace Model
       14410-NS
Metrology
Ovens
Photolithography
Pumps
Solar
-ASM Epsilon 2000
       Epi Reactor
-Alcatel DRIE
-Dispatch Conveyor
       Furnace Model
       14410-NS
-Schmid Light
       Induced Plater (LIP)
-SELA Sample Prep
       for Failure Analysis
       for SEM and TEM
-EEJA (Electro Plating
       -Engineers of
        Japan) Ni and
        Ag Plating
        System
-Schmid Light
       Induced Plater (LIP)
-EVG101 Coater
-Thermco Maxibrute
       200mm Oxidation
       Furnace
-Spare Parts
-Vacuum
-Wet Process
-Additional
     Equipment

Contact Us

Home

   
 

PHOTOLITHOGRAPHY EQUIPMENT

Conquer Industries strives to provide quality pre-owned equipment at reasonable prices. Below is a sampling from our current inventory. Of course, many other types of equipment are available, please call us to discuss these systems, or any other equipment needs you may have.

SVG (Silicon Valley Group) SMIF POD Acceptable, 150mmdeveloper track that is NEW and has never been used. It has the following features: Call for pricing
  1. SVG 90S SeriesDeveloper Track:
  1. Four (4) Serial Transfer Arms;
  2. Three (3) 9032 Developer Modules;
  3. Six (6) 9036 HOP-S Hot Plate Oven Modules;
  4. Two (2) 9044 CP-S Chill Plate Modules;
  5. 9064 Fluid Temperature Controllers;
  6. Two (2) 9023 SMIF Indexers for 150mm wafers;
  7. TEN (10) Station stainless steel cabinet;
  8. Set up for 150mm wafers;
Also Brand New:
2 each Filters;
1 each M.C.E. Cover;
1 each Tower Light;
1 each Microbar book;
1 each Artic cable;
2 each Nozzles;
1 each deck shield;
2 each cover plates;
1 each skirt;
3 each spindle covers;
2 each drain blocks;
1 each pump harness;
1 set of misc. hardware;
3 each gaskets;
3 each wafer glass;