About Us

New Equipment
Division

Pre-Owned
Equipment
Division

AMAT P5000
AMAT Spare Parts
Diffusion
-Dispatch Conveyor
       Furnace Model
       14410-NS
Metrology
Ovens
Photolithography
Pumps
Solar
-ASM Epsilon 2000
       Epi Reactor
-Alcatel DRIE
-Dispatch Conveyor
       Furnace Model
       14410-NS
-Schmid Light
       Induced Plater (LIP)
-SELA Sample Prep
       for Failure Analysis
       for SEM and TEM
-EEJA (Electro Plating
       -Engineers of
        Japan) Ni and
        Ag Plating
        System
-Schmid Light
       Induced Plater (LIP)
-EVG101 Coater
-Thermco Maxibrute
       200mm Oxidation
       Furnace
-Spare Parts
-Vacuum
-Wet Process
-Additional
     Equipment

Contact Us

Home

   
 

WET PROCESS EQUIPMENT

Conquer Industries strives to provide quality pre-owned equipment at reasonable prices. Below is a sampling from our current inventory. Of course, many other types of equipment are available, please call us to discuss these systems, or any other equipment needs you may have.

EEJA (Electro Plating Engineers of Japan) (NEW ITEM) Call for pricing
 

1 cup plater tool for Ni plating
1 cup plater tool for Ag plating


Drawing for three cup plater (PDF) (shown for info only)
FSI/BOC Edwards 1510 Chemical Delivery System Module (NEW ITEM) CALL FOR PRICE
 

FSI/BOC Edwards 1510 Chemical Delivery Module for Hydroflouric (HF) Acid and DI Water mix. Highly sophisticated system designed for ultra clean distribution of chemicals via pressurized systems so there are no pumps to fail; easy to use, simple and inexpensive to maintain. All Teflon fluid path in pristine condition with four filter housings and like new condition. For customer security reasons software was removed, which be added, upgraded or sold As Is at customer preference.

FSI/BOC Edwards ChemPrep 100 Chemical Blending System Module (NEW ITEM) CALL FOR PRICE
 

FSI/BOC Edwards ChemPrep 100 Chemical Blending Module for Hydroflouric (HF) Acid and DI water blending and mixing. Highly sophisticated system is designed for ultra clean blending, mixing and distributing of HF Acid in specific concentrations or ratios which customer determines and specifies in computer program. Once programmed, walk away and system will do the rest. Combine with Chemical Delivery System Module to distribute to any tool and bulk distribution is completely automated - no operator is necessary for dangerous HF acid distribution into any tool. Most important, is safest for your operators. Will also reduce the operators needed in a fab, reduce o insurance costs, allow you to purchase less expensive chemicals since you can filter them prior to use, reduce prospective litigation costs since the process is more safe, reduce ergonomic costs, and reduce workers compensation costs to list a few. A wise investment for a very low price.

PLASTIC DESIGN 6' CP7D WET PROCESS STATION (NEW ITEM) CALL FOR PRICE
 

Plastic Design 6' front access CP7D wet process station in OUTSTANDING condition. Includes three each PVDF processing tanks, with microprocessor based T-16A timers, one quick dump rinser with a microprocessor based QDR controller, and one utility sink with a ball valve actuated gooseneck. Standard features include an EPO switch, aspirator wand, Teflon DI and N2 guns and exhaust transition. All process baths include covers (not utility sink) and full 360 degree exhaust draw for operator safety.

SOUTH COAST ENTERPRISES WET PROCESS STATION (NEW ITEM) CALL FOR PRICE
 

South Coast Enterprises 6' Front Access Polypropylene Wet Process Station including the following: Perforated white polypropylene deck top surrounding polypropylene process tank, one quick dump rinser, one utility sink with ball valve actuated gooseneck, small containment bath, independent lights, recessed and retractable DI and N2 guns. Also includes carboy for waste containment, Emergency Power Off, rear exhaust pull and rear exhaust transition.

FRPP 6' WET PROCESS STATION (NEW ITEM) CALL FOR PRICE
 

6' front access flame retardant shell, system in OUTSTANDING condition. One 14"x24"x12"d utility sink with gooseneck, one 12"X18"X12"d ultrasonic with stainless cover, one 16"x24"x16" utility sink with risers for cleaning smaller items, one 8"x8"x10" quartz bath, one dual stage cascade with 8"X8" stage and 8"x8"x11.25" second stage, both designed for resistivity monitors and probe included with initial side. N2 gun, DI gun, glove wash and vacuum system also included.

Verteq Megasonic (NEW ITEM) CALL FOR PRICE
 

Verteq Hot DI Water System with:

  • Trebor DI water system monitor Model # 2254;
  • External fire alarm system built by Fenwal;
  • Remote emergency power off switch;
  • Machine circuit on/off and alarm silent switch;
  • Software included;
HF Acid Wet Process System (NEW ITEM) CALL FOR PRICE
 

  • Dual Cassette 150mm Wafers
  • Filtered recirculated process bath with heat exchanger coils
  • Quick dump rinser with spray bars
  • Auto transfer system with agitation
  • To be retrofitted with fully programmable IDX software and control system package upon order
  • Color touch screen HMI
  • Programmable logic controller
  • N2 and DI Hand sprayer
  • Easy access maintenance doors
  • Emergency stop system
  • Photos of actual system in current condition below
  • 1-year Warranty on control system and software
  • 90-day Warranty on base system
  • Available service, upgrades & modifications upon request


Piranha Wet Process System (NEW ITEM) CALL FOR PRICE
 

  • Dual Cassette 150mm Wafers
  • Verteq® static quartz bath with in tank heater
  • Quick dump rinser with spray bars
  • Auto transfer system with agitation
  • To be retrofitted with fully programmable IDX software and control system package upon order
  • Color touch screen HMI
  • Programmable logic controller
  • N2 and DI Hand sprayer
  • Easy access maintenance doors
  • Emergency stop system
  • Photos of actual system in current condition below
  • 1-year Warranty on control system and software
  • 90-day Warranty on base system
  • Available service, upgrades & modifications upon request


Verteq Sunburst (NEW ITEM) CALL FOR PRICE
 

Verteq Sunburst with:

  • Verteq RF Amplifier Model 3156023-000D, 50-80Hz;
  • Verteq Frequency Generator Model STQD600-C2-M2, 5 Amps;
  • Verteq Handheld calibration system, Model 8045R4-2;
  • Verteq Sunburst QDR (pictured above) with serrated overflow weir, designed to accommodate 2 each 125mm wafer cassettes;
WET PROCESS STATION (NEW ITEM) CALL FOR PRICE
  6' Front Access Polypropylene Wet Process Station/Laminar Flow Hood including the following: Fully perforated polypropylene deck tops; 2 each polypropylene utlitily sinks with City Water Goosenecks (1 per sink), each sink measuring approximately 16" X 14" X 6.5" deep ID; 2 each Teflon DI guns and 1 each Teflon N2 gun (one on each end of station). Standard features include safety shields with 12" opening which raises an addition 8", fluorescent lights, perforated rear and dual side storage shelves for beakers, rear exhaust pull.
SEMITOOL ST 270 SRD (NEW ITEM) CALL FOR PRICE
  designed to accommodate 4", 5" or 6" wafer cassettes. Table top model includes stand (if requested) at no additional charge. Includes Semitool TC-20 Resistivity monitor. Guaranteed operational with 30 day warranty. Rotors available at additional cost. In stock and immediately available to ship. 1996 vintage.
SEMITOOL SRD (NEW ITEM) CALL FOR PRICE
  Stand alone fully automated opening door. 1997 vintage.
4' Polypropylene Laminar Flow Hood (NEW ITEM) CALL FOR PRICE
  4' Vertical Polypropylene Laminar Flow Hood. Counterbalanced PVC safety shields to close 100% and remain opened when required. 2 each 208v, 1 phase duplex outlets.
Semitool ST-840, ST-860, ST-880 Call for Pricing
  Semitool single stack, double stack, desk top and stand alone spin rinse dryers currently in inventory. Rebuilt with a warranty, or As is Operational. Options include controller upgrades, rinsing to resistivity, rotors, etc.
Also available in "S" model configurations.

Semitool rotors - Call with specific cassette requirements